183-114HSP Graphite Half Frame, 114HSP Decal

The 183-114H graphite half-frame has a scooped out edge which uses a 37M-114 thinner
post for a line guard which is included with this housing. The housing has four screw
holes on each side that use the 39-13 machine threaded side plate screws.
The original top post of a reel is still used with this housing. If you are modifying an existing reel,
be aware this housing is for use with five hole side plate rings. If your existing outer side rings have
eight holes, then replace them with one 2N-114 and one 2N-114H five hole outer rings.
There is no need to change the inner rings, since the extra inner ring screw holes will be hidden
by the half-frame graphite housing.
It is also likely that you may have to squeeze the frame with a hand clamp to line up the top frame screws.
Heavy duty 34-50T studs and light duty 34-10KG studs fit this 183-114H graphite half-frame.
This frame style is the pre-cursor to the newer designed 114H2 series of Penn Senator reels.

To Summarize, Parts needed to Convert the 114HL or other 114H versions with 8 hole rings, from it's stock housing are:

Included in the 183-114HSP KIT:

• Qty 1 of 183-114H frame with built in stand
• Qty 1 of 37M-114 thin post (on the frame)
• Qty 8 of 39-13 Frame Screws (Enclosed)
• Qty 1 of 32-21 Non-Handle Side Post Screw (at lug) (Enclosed)
• Qty 1 of 39-12 Handle Side Post Screw (at lug) (Enclosed)

NOT part of the kit:

IF YOUR CURRENTL 114HL rings have 8 HOLES, you would need to CONVERT to the 5 HOLE OUTER rings.
Again, There is no need to change the inner rings, since the extra inner ring screw holes will be hidden by the half-frame graphite housing.
• Qty 1 of 2N-114 Non-Handle Outer Ring (5 HOLES)
• Qty 1 of 2N-114H Handle Side Outer Ring (5 HOLES)

And the kit does NOT include these studs:
• Qty 2 of either 34-50T heavy duty studs OR Qty 2 of 34-10KG light duty studs